Responsibilities:
1. Assists with mechanical design, development, testing and documentation for laboratory and portable instrumentation.
2. Interfaces with other design engineers responsible for usability, industrial design and compliance.
3. Reports on status of projects for R&D team members.
4. Development and innovation of functions, new products based on customer feedback, cost and manufacturability.
5. Working independently for mechanical design and product development.
6. Supporting series production.
7. Other tasks assigned by the manager, i.e. Standards, regulations, requirements etc.
Qualifications:
1. Technical University or bachelor’s degree in mechanical engineering or plastics technology.
2. At least three= years of experience in VC business, or similar appliances business.
3. Professional on mechanical system design and development.
4. Professional on commonly applied component development and manufacturing concepts.
5. Be able to use Catia for both 3D and 2D design.
6. Professional on documented experience of the relevant technical methods (DOE, DFMEA…)
7. Must have good computer skills including Microsoft Office.
8. Ability to create, design and document mechanical systems.

Responsibilities:
1. Assists with electrical design, development, testing and documentation for laboratory and portable instrumentation.
2. Interfaces with mechanical engineers responsible for usability, industrial design and compliance.
3. Assists with the electrical engineering tasks in specific projects at DG and support corresponding German colleagues on electrical related topics.
4. Qualify suppliers of PCBA, cable harness and electrical components.
5. Assists with the development of electrical requirements.
6. Other duties as assigned by manager.
Qualifications:
1. Technical university or bachelor degree in electrical engineering, automation engineering, mechatronics or similar.
2. At least 5+ years of experience in VC/AP/BBQ business, or similar appliances business.
3. Knowledge of electrical design and development.
4. Knowledge of commonly applied component development and manufacturing concepts.
5. Familiar with electrical circuit design and layout.
6. Knowledge of BMS, fan control, Wifi/Bluetooth connection etc.
7. Knowledge of safety requirement and standards of household appliance such as IEC, UL…
8. Good communication skills for both verbal and written in English.

Responsibilities:
1. Provide the measurement resource planning (internal, external cost and timeline, labor hours) and service to project team. Work on measurement method & system according to the design intention, build up and qualify the measurement fixture for mold maker T0/ FAI process and gauges for MSQC/IQC/Suppliers at SOP stage.
2. Build up and maintain the visual criteria for in-house made metal sheet part from new project to series production in plant wide.
3. Other tasks assigned to Metal Shop quality at project stage like package verification, experiment according to the demand requested.
4. Support the subcontractor / direct suppliers for quality control system and improvement activities on sheet metal parts.
5. Manage metal sheet quality first article inspection and in-process control procedure as the IMS required. Make sure the quality activities for inspection and control are implemented sufficiently and effectively though whole sheet metal parts production processes.
6. Create and maintain up-to-date status for Syteline QC item Creation, Inspection Plan, QC inspection status etc.
7. Ensure the consistency between the system location and physical location of sheet metal parts under control conditions.
8. Work with production department for CPII Q2, CPIX, customer complaint, drive the action plan to prevent issues on why happened and why escape, maintain the Status Systematics Report related to In-house Sheet metal quality but not limited.
9. Maintain SPC system and push team for continuous improvement.
10. Other tasks assigned by supervisor/director.
Qualifications:
1. College and above degree, major in mechanical technology or related area.
2. At least three Years experience. Familiar with Sheet metal parts production process and molds.
3. Understand the quality control process and problem-solving knowledge is a must to drive root cause analysis and corrective actions, preventive actions by using data (Statistics) driven skills.
4. Know ISO 9001 QMS and GMP requirements, master quality tools including MSA, SPC, CPK, PPAP, GRR, QCC, Six Sigma, 8D etc.
5. Command quality management theories and has good quality concept, get the basic knowledge for operation and requirements from KPI, 6S, EPR etc.
6. Knowledge / experience of project management and continuous improvement projects.
7. ISO 9001 internal auditor and Six Sigma Green Belt (or above) are plus.
8. Good in Chinese / English communication (English can be used as working language)
9. Familiar with Office (word, excel, PPT, Power App, office etc.)
10. Could work under pressure. Good logic thinking and team player.

Responsibilities:
1. Assists with mechanical design, development, testing and documentation for laboratory and portable instrumentation.
2. Interfaces with other design engineers responsible for usability, industrial design and compliance.
3. Reports on status of projects for R&D team members.
4. Development and innovation of functions, new products based on customer feedback, cost and manufacturability.
5. Working independently for mechanical design and product development.
6. Supporting series production.
7. Other tasks assigned by the manager, i.e. Standards, regulations, requirements etc.
Qualifications:
1. Technical University or bachelor’s degree in mechanical engineering or plastics technology.
2. At least three= years of experience in VC business, or similar appliances business.
3. Professional on mechanical system design and development.
4. Professional on commonly applied component development and manufacturing concepts.
5. Be able to use Catia for both 3D and 2D design.
6. Professional on documented experience of the relevant technical methods (DOE, DFMEA…)
7. Must have good computer skills including Microsoft Office.
8. Ability to create, design and document mechanical systems.

岗位职责：
1、负责电池产品/项目的设计开发、产品开发、研制工作，制定开发计划。
2、负责电池技术团队的技术指导工作，解决电气、电子、结构设计过程的疑难问题。
3、负责电池产品/项目整体分工、协调和进度管控工作。
4、负责重大项目的产品研发工作。
5、分析国家政策对新能源技术的趋势影响，整合国内外产品应用环境对新能源市场的产品验证和需求预测，组织研究公司产品的创新方向。
6、组织分析、解决公司电池产品在研发、生产、销售、售后等环境的技术问题。

岗位职责：
1 统筹公司质量体系的建设与维护。
2 统筹主导内审、管审、外审等质量体系审核工作。
3 负责公司质量目标达成工作计划制定，并定期向公司管理层汇报达成结果。
4 负责组织召开公司质量月会、质量目标达成检讨。
5 负责公司产品质量保证工作。
6 负责部门日常工作安排与内部事项协调处理。
7 负责部门人员工作绩效考核方案检讨与绩效评定。
8 负责部门团队成员能力培养。
9 负责重大质量异常及客户投诉处理。
10 公司产品品质持续改善推动。
11 新产品试产之品质管控。
12 供应商管理。
13 完成领导安排的其它事宜。
任职要求：
1、大专及以上学历
2、8年以上品质部门相关工作经验
3、具有至少5年以上大型外资企业或国内知名EMS企业相关岗位工作
4、英语口语流利，精通生产管理和品质管理
7、有团队管理经验

岗位职责：
1、本科及以上学历，英语4级，电子信息、控制专业、电机控制、自动化、计算机等工科相关专业（有实际能力不限专业）；
2、具有5年以上MCU嵌入式软件开发工作经验，有2年以上BMS设计开发工作经验优先。年龄25-35岁；
3、扎实的硬件开发和调试能力。良好的编程风格和软件开发规范。具有扎实的自动控制、信号处理相关知识，良好的数学基础；
4、精通PIC、STM8，STM32等8-32位MCU程序开发，熟悉I2C、SPI、RS232、RS485、CAN等通信技术及工作原理与接口开发；
5、具有较强的学习能力，团队合作精神，较好的沟通协调能力。

职位:无叶风扇结构工程师
主要职责:
1.负责无叶风扇产品的结构设计、3D建模及2D图纸输出。
2.进行塑料、五金件等零部件的材料选择、工艺评估及成本控制。
3.解决产品开发中的结构问题，确保设计的可靠性、可生产性及安全性。
4.与电子、电机工程师协作，完成整机集成与测试验证。
任职要求:
1.机械设计、机电一体化等相关专业大专及以上学历。2.精通 Creo/Pro-E或 SolidWorks 等3D设计软件。3.熟悉塑料、模具、五金冲压/压铸等材料和工艺。4.有家电产品(尤其是风扇、空气净化器、吸尘器等风道产品)结构设计经验者优先。5.具备良好的分析解决问题能力和团队协作精神。

1、男/女不限，大专或以上学历，25-43岁。
2、熟练使用UG、PRO E AUTO CAD软件。
3、有小家电基础或工作经验优先考虑。

1、大专以上学历，二年以上相关工作经验。
2、工作踏实，服从管理，责任心强。
3、熟练使用PRO E AUTO CAD软件。有电器、电子厂工作经验优先考虑。

1. 大专或以上文化程度，男，45岁以下；
2. 熟悉工模结构，熟悉产品加工工艺；
3. 熟练操作Pro/E,CAD等软件
4. 3年以上塑胶产品结构设计工作经验。

有塑胶产品ID设计/平面设计3年或以上经验，熟练使用平面设计软件，如Adobe Photoshop，Adobe Illustrator，Adobe InDesign，CorelDRAW等，有一定的自主创新能力，能结合样板产品创新画出系列新品的产品图案。薪资面谈。

1.熟悉工厂品质管理流程，对品管工作有一定的了解和认识。
2.有小家电风扇的工作经验。
3.对工作有认真好学的热情，有上进心。
4.具有团队合作的精神。

1.数字观念强，有较强的统计能力。
2.服从上级的安排，有团队合作精神。
3.具有吃苦耐劳，好学，肯上进的心态。

-学历要求：大专或以上学历，机械及机电相关专业优先。
-工作经验：2年或以上马达行业设计及设备 维修经验。
-专业知识：熟练操作solidworks，对马达结构设计了解，能独立处理生产工程工艺问题，对马达生产设备机器维修丰富经验，有责任心、 沟通协调能力。
岗位职责：
1、负责马达生产日常工作及生产设备 维修；
2、负责改进生产线设备提高品质及效率；
3、负责TPM工作，协助马达项目及结构设计工作；

-学历要求：中专学历或以上，电气工程自动化专业优先;
-工作经验：2年以上相关马达工作经验;
-专业知识：熟悉马达生产线相关设备的维护与调校（如转子绕线机/槽纸机/槽楔机/转子五工位减料平衡机等），能独立完成相关设备的维修保养及调试工作，懂得基本的电子常识。